Pave-Tex is a textured coating with acrylic polymers that is easily applied by roller; it adheres to a damaged or new asphalt or concrete surface.
Use Pave-Tex to resurface paved driveways, parking lots, playgrounds, tennis courts or any other surface that requires the texture and durability of asphalt.
Finally, a solution without the hassle of heavy machinery and bitumen vapours in your front yard!
Pave-Tex products can also be applied on concrete surfaces to have the colour and texture of new asphalt. Imagine resurfacing your tennis court yourself with a roller!
Here are the steps to follow:
How to redo your driveway easely?
Step 1 – Setting up the surface
Trim the grass edges and clean up all dirt, dust and debris, then rinse the asphalt area using the strongest water jet possible.
Step 2 – Clean oil stains
Scrub any stains with a stiff wire bristle brush and TexNov Surface Preparer. This will remove any existing motor oil stains and other dirt, and TexNov’s Surface Prep will prevent the stain from returning to the surface after the new coat is applied.
Step 3 – Fill cracks with a trowel or a putty knife
Then locate any existing cracks. Use TexNov’s Crack Filler for cracks less than three-quarters of an inch wide.
Crack filler (20 kg)224.75$
Fill the crack to the brim and let the product cure according to the directions on the label. For larger cracks, use a specific product to seal potholes, tamp them down and fill the hole to the brim. By following this technique, there will be a minimum of shrinkage before applying the sealer as a finishing coat.
Step 4 – Apply the Pave-Tex asphalt coating
Apply two coats of Pave-Tex with a roller. You can use a brush to paint the edge of the driveway. So easy and so durable!
You can use the brush to trim the edges of your driveway and the roller for the large surface.
Follow instructions carefully for drying times.
Pave-Tex will restore the appearance and texture of new asphalt in a matter of minutes, and its results will last for ten years.
End of the project – revive, seal and protect your driveway in one weekend!
By following this easy step, you have just extended the life of your paved driveway for ten years.
Pay attention to the drying times on the product sheet!
Learn more about Texnov products by visiting our website at www.texnov.com
Paving the entrance to your home is an investment that improves the quality of life and enhances thecurb appeal of your home. At TexNov, we are aware of this, and to help you protect your investment, we have developed the Pave-Tex. Pave-Tex is the ultimate solution to protect and enhance the original look of your driveway.
Follow the steps below for best results:
Asphalt resurfacing project – a durable, clean and easy project
Paving the entrance to your home is an investment that improves the quality of life and enhances the curb appeal of your home. At TexNov, we are aware of this, and to help you protect your investment, we have developed the Pave-Tex. Pave-Tex is the ultimate solution to protect and enhance the original look of your driveway.
Request our products from your trusted retailer or use the interactive map to find the retailer nearest you .
A project of a few hours for optimal results for ten years!
Before you start, check the weather forecast. The ideal conditions: a beautiful weekend without the possibility of showers and that the temperature will not drop below 10 degrees.
Please click on the following links to download the technical data sheets for Pave-Tex and TexNov Crack Filler.
Find out what Pave-Tex has for you by visiting the website www.pave-tex.com